6″ ARCHITECTURAL LED DOWNLIGHT

Description

 - Lighting is smooth and comfortable while using 50% less energy than the common 26W & 32W CFL downlight

 - Eco-friendly no lead or mercury

 - Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlight to save anywhere from 35% up to 75% on energy cost.

 - Idea suited for use in commercial, retail and other architectural applications

 - Available with dedicated Emergency Battery Back-up

Electrical System

 - Thermal protection guard protects the LED module from overheating and will dim LED module if necessary

 - PF>9.50/60Hz

 - Fully dimmable down to 10% of initial light output with a 0-10 Volt dimmer.

Clearance

 - Frames require a minimum clearance of 3” ring from thermal insulation and 1/2” from adjacent building component.

Mounting

 - Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlight

 - Flex is designed to attach into existing junction box.

 - Vertically adjustable universal mounting brackets accept flat bar hangers, conduit or C channel.

 - The reflector assembly is held in with 4 “butter-fly” spring clips.

 - Reflector assy quickly attaches with lockable quick connect. Hanger bars ordered separately.

 - Compatible with C-channel, flat bar wood joist bar hanger and EMT

Junction Box

 - Plaster frame integrated 29 cubic inch 0.064" thick galvanized stee

 - Provided with four ½" knockouts, one ¾" knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs.

 - Electrical connections are made through a single junction box door.

 - Green wire provided for installation with ground wire fed through PVC pipe conduit.

Driver

 - The LED driver is mounted to the J-box cover and is accessible from below the ceiling.

 - Rated for 50 to 60Hz at 120V/277V input

 - Produces less than 20% THD